T: +44 (0)1903 866225  
Max Measure
  • Home
  • About
  • Products
    • Anemometers >
      • MM-AN01
      • MM-AN03
    • Angle Products >
      • MM-DAP01
      • MM-DAF01
      • MM-DAS01
      • MM-DAS01L
      • DSL
    • Automotive Products >
      • DPP
    • Infrared Thermometers >
      • MM-IT01
    • Lux Meters >
      • MM-LMB01
      • MM-LM01
    • Moisture Meters >
      • DMMU
    • Sound Meters >
      • MM-SMB01
      • MM-SM01
    • Tachometers >
      • MM-TM01
    • Vernier Calipers >
      • DV-150
      • DV-200
      • DV-300
    • Weather Stations >
      • YD8211A
      • YD8230A
  • Stockists
  • Contact
Picture

DPP Automotive Probe

This professional tool is suitable for commercial or occasional use. Perfect for auto electricians and mechanicsto carry out tests on cars, vans and small machiney from 6 volt up to 24 volt quickly and efficiently with LED indicators and audible tone for when the circuit breaker trips. It can assist in the reduction of diagnostic time in automotive electrical systems.
Connect the probe on to the vehicles battery, then you can conduct a positive or negative battery current to the tip by rocking the power switch forward or backwards. The probe has short circuit protection and can test for bad ground contacts instantly. It can allow you to follow and locate short circuits and also test for continuity with the assistance of its auxiliary ground lead. Comes complete with 5 metres cable. The probe will make a sound when the circuit breaker trips. Once it trips the unit will reset automatically 3-5 seconds later.

Features:
• Test for Continuity
• Test for Polarity of the Voltage
• Check Lamps
• Check Electric Motor
• Power Supply Function may be selected
• Follow and Locate Short Curcuits
• Test for Bad Ground Contacts
• Short Circuit Protection Device
• Safe to user around Vehicles Electronice Management Systems
• Handheld
• CE & RoHS Compliant
Specifications:
• Operating Voltage: 6 - 24 Volt DC
• Overload Protected: 8A (disconnects if current exceeds 8 amps)
• Cable Length: 5 Meters (approx. 15ft)
• Tool Length: 200mm (inc. probe section)
• Weight: 340g

Polarity Tests:
• Starter Solenoids
• Cooling Fan Motors
• Window / Sunroof Motors
• Fuel Pumps
• Relays & Lamps
• Wiper Motors

Continuity Tests:
• Switches
• Diodes & Fuses
• Relays
• Wiring Harnesses Set Includes:
• Probe
• Leads/Cable
• Instructions

Packing:
• Colour Display Blister, including English instruction manual


@2015 Max Measure